About nathanmccoy

nathanmccoy · 06-15-2009

I am trying to connect my cisco software vpn client (latest version)from home, behind an ASA5505(v8.2), to my work VPN hosted by a PIX515(v7.2).(word diagram)client->ASA5505->internet->PIX515I've attached both logs. The ASA and the PIX. The 515 is co...

nathanmccoy · 11-15-2008

I have an ASA5505 connected to a Catalyst 3550. I am trying to connect a wireless access point to the Catalyst interface FastEthernet0/2 and the ASA is not issuing DHCP addresses or access to the internet for my wireless clients, it does for the de...

nathanmccoy · 06-16-2009

Yes, I was able to establish multiple tunnels.I tried it from the ASA here at work, it's on a separate ISP, and on the ASA from my home network.The one I established here at work received an IP of 100.100.100.2 and the one from the house received an ...

nathanmccoy · 06-16-2009

Solution found.Look back at my configs the PIX and the ASA.Are you ready?I entered:crypto isakmp nat-traversal 20on the !PIX! and everything works fine.I knew it would be that command somehow, I just didn't know where I was dogging it up.There was no...

nathanmccoy · 06-16-2009

I know it will work, it's just a matter of fixing what I've done in the ASA config.Unfotunately I do not have a TAC contract or this would have been solved a week ago.I used the only other fountain of knowledge available to me, experts-exchange. If I...

nathanmccoy · 06-15-2009

No, the ASA is my home network with only a single static outside IP assigned to it. The main reason for my post, and this setup, is that I plan to be shipping the ASA5505 to clients in the field that will still need to be able to connect via VPN clie...

nathanmccoy · 11-15-2008

Sorry about that. I had to edit the config I displayed in the post and I accidentally copied one of the ports that were shutdown.interface FastEthernet0/2 is not shutdown.Nathan

Member Since	‎02-11-2008 11:41 PM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	7
Total Helpful Votes Received	10

User Statistics

User Activity

Cicsco Software VPN Client connect fails to pass through ASA5505 to PIX515

ASA5505-Catalyst3550-Wireless Access Point. Config Help

Re: Cicsco Software VPN Client connect fails to pass through ASA

Re: Cicsco Software VPN Client connect fails to pass through ASA

Re: Cicsco Software VPN Client connect fails to pass through ASA

Re: Cicsco Software VPN Client connect fails to pass through ASA

Re: ASA5505-Catalyst3550-Wireless Access Point. Config Help