About rlloveras

rlloveras · 04-02-2008

First i want to tahnk anyone who has any input on my problem. I have an ASA 5520 that is being use as a firewall, VPN concentrator and also a L2L tunnel. The trouble that i am having is about the L2L part. I have different remote site that needs t...

rlloveras · 04-01-2008

I have version 7.2(1) on asa 5510. Due to reverse route putting a static route on my routing table. When the tunnel goes away shouldn't the static route go away also?

rlloveras · 03-15-2008

Hi i have a network running eigrp and my default gateway is the ASA 5510. THe network runs find but i want to set up remote connectivity through the other site incase they loose link with IPSEC tunneling. I have establish Ipsec between sites (ASA a...

rlloveras · 02-25-2008

Hello All,I am having problems connecting ipsec l2l. I have configure a router and asa 5510 to do ipsec between them but it seems to fail on phase 1. I check already and i am 100% sure the key matches. Can you some shed some light on the issue i am ...

rlloveras · 06-12-2008

Just wanted to find out if you have solve this issue. Currently i also have fallen to the scenario. Can you please tell me hos you solve this problem.Thanks

rlloveras · 06-11-2008

what was your fix if you dont mind me asking.

rlloveras · 04-07-2008

Thanks for the reply i actually have seen that there was a configuration problem on the ASA that caused the problem. The reverse route is not needed now.

rlloveras · 03-31-2008

When i configured the reverse route on a hub spoke L2L environment it causes problems due to the static be the defualt route out to the remote site even if though the tunnel is down. This causes routing problems for the VPN client that needs to acce...

rlloveras · 03-28-2008

The problem i have with reverse route being enable on a L2L is it inject the static route on my ASA 5510 V.7.2(1). This causes certain routing issue when the network is back to normal. Is there anyway that i can have the static route dissapear when...

Member Since	‎02-15-2008 06:14 AM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	17

User Statistics

User Activity

IPSEC L2L behavior

Reverse route Injection

IPSEC L2L question

IPSEC with router and asa 5510

Re: Cisco PPTP passthrough

Re: enable microsoft pptp thru cisco 2610 router

Re: Reverse route Injection

Re: Reverse Route Injection ( RRI ) for Lan 2 Lan ( L2L ) VPNs

Re: Reverse Route Injection ( RRI ) for Lan 2 Lan ( L2L ) VPNs