Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have 3 inside networks that I would like to route between and also allow for outside access to the internet. 192.168.98.0/24,192.168.99.0/24,192.168.97.0/24 All 3 are defined on a 3560 that has a default route which points to my ASA 5510 inside i...
Actually once you pointed out that the 3560 would be doing all the routing it finally clicked... Things are now working.Now I just need to allow my my 99,98,97 networks access over our VPN tunnel to another site....thanks for the help
Just to clarify, at this point and time I am only trying to get the 192.168.98.0/24 network to route to 192.168.100.0/24 or the internet. So I can see your point about needing those routes for the other VLANS... However my issue still appears to be...
the "ip routing" command is in the configuration.ip route 0.0.0.0 0.0.0.0 192.168.100.1 is also in the configurationI have 3 vlans and ge0/1 is configured as a layer 3 port, not a switchport with an IP of 192.168.100.2.On the ASA I have a route line:...
