Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
HiWe have one Pix sitting as f/w for our servers. I now want to configure another pix, whose outside interface is on the same subnet as the inside interface of the first Pix. The second Pix will be infront of our LAN, so you can consider the servers ...
HiAs the title says, we cannot access out DNS server which is 192.168.7.199 from any other hosts behind the PIX in the 192.168.7.0/24 range.i have been through the document which talks about DNS rewrite and hairpinning, but neither seem to work. I th...
HiWe have a PIX515e setup where we are using NAT for our internal hosts.inside-network is 192.168.7.zzz/24outside network is 194.xxx.yyy.zzz/24where zzz in the inside and outside are exactly the sameThe issue we are facing is that, our machines on th...
HiWe have an 1841 Router with a Lease Line coming through on it. We have been advised to use a Firewall between the 1841 and our LAN, so we are using a 515e which we have in the office.The scenario up until now has been with regards to our 515e, that...
HiI was recently re-configuring our PIX 515e, and upon reload, i am now unable to access the PIX, neither through the ASDM nor through Hyperterminal/TelnetI know what the IP address if the internal interface is, but it isnt responding. Is there a way...
Hi Thank you for posting this. We have recently come across this issue and the "Refresh" button isnt resolving the case.I cannot seem to match up the number of hits on the FW dashboard to the number of hits on any of the FW Rules, trying to trace th...
Hi ImartinoSorry its been a feew days. Just to say many thanks for your help in this problem i had, managed to solve it by editing host files to allow communications.Brilliant thanks againRegardsAli
Hi JonSorry its been a few days, i had taken time off. Just to let you know, that I managed to get it working thanks to your help throughout.Essentially what i did, was to use the points you gave me in your replies, and created double-natting, so the...
JonThanks, i tried both methods, but wasnt successful with either. I am attaching the pix config for Pix1. (19x.yyy.zzz is a public IP range)Which interface does the Static Route from Pix1 to 192.168.5.0/24 come from, is it inside or outside ? It is ...
