Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have an ACS 4.1 appliance, I have already configured ACS in order to work with certificate. I got the certificate from ACS, I already installed it as the installation guide says . Additionally I configured the card's controller in my PC in order t...
I have configured MAC filtering in a ACS ,previously I configured user group to be validated by ACS. Authentication by user is fine but when I add the option of additionally filter by MAC it works fine at the beginnig but after some trying allows al...
I am configuring an ASA, but I have no respond when I try to ping to any outside IP address. I have already checked the commands related to ICMP and I have already set those commands.Is something left still ??? this is the sh run file.....ciscoasa# ...
I was asked to authenticate by means of a ACS all the PCs, In order to carry out this requirement I had to configured the switch's port. However now I was asked to athenticate printers by means os ACS and the printers will be moved frequently.Is is p...
thanks for your help jgambhir, the ACS is Cisco Secure ACS Solution Engine 4.1 ships on the Cisco 1113 appliance platform. New customers should order part number CSACSE-1113-K9.
Hello Gorge thank you for your support, but the problem was the version of the handle, I made the update and everything worked. Anyway thank you very much, we are in contact cuidate goodbye.
hi Jorgethanks for your comments..I have already test that command but it did not worked. I have still the problem of nothaving respond when I ping from inside to any outside ip address (public IP addresss)any other suggestion??
