Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I've upgraded a DMM from 4.1 to 5.0. This proccess was successful. When I try to access the web interface, the main page doesn't appear. The telnet to the 8080 TCP port responds correctly. It has a static IP address and a FQDN. The DNS server has an ...
Hi all!I have a 7960 IP Phone with CUVA, CCM 5.1.3, 2811 router with VIC2-2BRI-NT/TE and IOS 12.4(11)T IPVoice. I want to make video calls to a Cisco 3527 (1 PRI) through ISDN.If I use the IP phone without the CUVA, the call is established as audio c...
Connect via telnet. If you don't have a prompt press Ctrl+C. For seeing the configuration menu execute the command modifyTargetDevice (case sensitive). When you exit the menu the EMP reboots.Hope it helps!
Hi Danny!As far as I know, if an H.323 client is not registered to a gatekeeper, it only can dial by IP address. So, why can you dial by extension? If you register an H.323 client in a CCM, you can only receive calls, you can not make calls because y...
