Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am having extreme difficulty setting up Cisco Aironet 1310 series devices. here is an overview:We have our main network with an ip scheme of 10.1.1.0/24 on one side and an office across the street that is on 10.1.2.0/24. I want to connect these 2 n...
Yes, they do. The AP's have IP's of 192.168.1.2 and .3 respectively while the VLAN's are 192.168.1.1 and .2. This subnet is for the wireless bridge and it needs to bridge 2 other subnets on each side. 10.1.1 on side A and 10.1.2 on side B.Does that m...
But we are not running this through the routers. See, we have a PTP router that runs VoIP traffic (and the data right now that needs to be switched over to the wireless briges!)So, I am trying to get this to run through VLANS on our switches. See, th...
Hi Andrew, Thanks for the response.AP's are running in "root" and "non-root" mode and they are able to talk to each other ok. Just can't get the traffic to flow from point A to B (the main network, through the wireless bridges, over to the remote net...
