Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
HiI have just implemented VRF for a MPLS & Internet service on a shared 3845 platform and I have now lost my default route propagation to my remote sites. Before implementing VRF the default route propagated fine to the remote routers and I had a rou...
Hi given this is my first post please excuse any glaring errors, My problem is I am having issues reaching the internet from our 3845 router using VRF the setup is as followsI have a 3845 router with a DS3 Cct connected to my provider. One T3 sub-int...
SamAdding the default-information originate to the BGP config worked, we now have the default route propagating out to the remote MPLS connected sites and internet access via gi0/1Many thanks for all you helpRegards Andrew
Sam results are as followsWithout VRF enabledrouter#sh ip route 10.1.3.253Routing entry for 10.1.0.0/20 Known via "connected", distance 0, metric 0 (connected, via interface) Advertised by bgp 64610 Routing Descriptor Blocks: * directly connected...
Sam The last sentance above should readWhich I think proves what you are saying but I want a static route within global to always point to the insdie interface of our firewall 10.1.3.253 not to s2/0.518Regards Andrew
Samthe show ip route without vrf is as followsGateway of last resort is 10.1.3.253 to network 0.0.0.0******Then lots more routes then this oneS* 0.0.0.0/0 [10/0] via 10.1.3.253the show ip route with VRF is exactly the same but when I do a show ip r...
Sam without VRF activesh ip bgp 0.0.0.0BGP routing table entry for 0.0.0.0/0, version 409Paths: (1 available, best #1, table Default-IP-Routing-Table, RIB-failure(17)) Advertised to update-groups: 1 64875 3549 207.138.94.181 from 207.138....
