Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a cisco ASA 5540 firewall with a DMZ segment, Inside segment & outside (Internet segment). The web server with website domain www.mysite.com is in DMZ segment NATted with public IP on Internet segment.I have allowed full internet access to a m...
I have ASA 5540 in router mode. I need to connect 2 outside networks to access my web servers in dmz and inside networks of ASA.In ASA I am able to make only one route to outside gateway, but I have two gateways on 2 different outside interface of AS...
I am facing a problem with ASA for providing Application connectivity to intranet hosts. The details are explained below:The Network structure is as follows:- Intranet gateway router = 172.16.150.1- ASA outside interface = 172.16.150.3- NAt'ed IP to ...
Dear Andrew,tks for r support, but the problem is not resolved then also because actually, the inside system is unable to access the website hosted on dmz segment using the public IP path.please let me know the config required to give access to insid...
I have used static NAT as given below# static (inside,outside) 172.16.150.2 192.168.8.21 netmask 255.255.255.255here no public IP is involved, 172.16.0.0/ 24 is Intranet network connected on outside interface of ASA through router 172.16.150.1, and ...
problem is that Intranet hosts outside ASA cannot get tcp/http access to web servers residing inside ASA even after permitting any host to inside network by access-list.
