About mbevington

mbevington · 05-21-2008

I'm going crazy! I've looked all around the internet using sample configs and I can't get going (I'm new to Cisco).I can hookup the Wan fa4 to my linksys router, it picks up a dhcp ip and I can ping that. I can't ping the fa0-3 ports (when I assigned...

mbevington · 05-13-2008

I bought the AdvIp IOS which requires a memory upgrade. So I popped in a 32meg flash. Now there's no OS, I get ROMMON, can't get router#boot just ROMMON. TFTP doesn't work because it seems like the interfaces are disabled (tried all the switch ports ...

mbevington · 05-22-2008

Still having the same problem.Somehting new though - I'm seeing an NVI0 interface popping up: it wasn't before. Is this the problem?

mbevington · 05-22-2008

Ok, I put it in by hand - looks like nothing changed.What else could be wrong?Thanks!

mbevington · 05-21-2008

I checked SDM and they are all Vlan1.Should I put this in "by hand"?

mbevington · 05-13-2008

Got it - finally.The port wasn't enabled - and it didn't know the command in ROMMON to turn it on.After getting it going, creamcheese :)Success!

mbevington · 05-13-2008

That's what I was trying - I can't get "router#", does that mean I have to use xmodem? I've never used that before and had read bad things about it.

Member Since	‎05-13-2008 09:58 AM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	7

User Statistics

User Activity

Can't get 871w to work - traffic doesn't pass from fa0-3 to wan fa4

871w Upgrade Memory - now stuck

Re: Can't get 871w to work - traffic doesn't pass from fa0-3 to

Re: Can't get 871w to work - traffic doesn't pass from fa0-3 to

Re: Can't get 871w to work - traffic doesn't pass from fa0-3 to

Re: 871w Upgrade Memory - now stuck

Re: 871w Upgrade Memory - now stuck