Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We just purchased this switch (50 ports) and hooked it up to our network.We took out all connection from our excisting gigabit switch and connected them to the cisco.About half of these came up fine and the others were showing down. We took the ones ...
Hi, I'm trying to help a small non profit company with an issue they are having.They have an old cisco pix 501 firewall. I can access it via the device manager interface from my browser.What they want is to be able to get all the traffic from th...
Hi, what I ended up doing is to upgrade the firmware adn that solved it. The issue now the web interface takes forever to load and to show any informationGood luck
Thanks.I have reached out to tech support to see if they can help. I was told to turn off STP and green ethernet but that did not resolve the issue. One user lost connection in the middle of the day while she was working and after few minutes the con...
Thanks David. This is a new purchase and I can access the GUI. Using the default settings and no other configuration is done so far. I just tested again with anohter user. I pliged the cable from the old switch to the cisco and no light for like 3 m...
Shrikant, thanks again for the help, I really appreciate it.So if I have a managed switch, all I need is to mirror the port (#1) that is connected to the pix to another port (#2) and have a laptop running wireshark connected to the mirrored port (# 2...
Thank you again, I really appreciate it.I don't have any managed switched to SPAN the port of the pix.I might have a hub somewhere.So when I use wireshark, I just capture the traffic from the laptop connected to the switch?If you can explain this in ...
