Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all
My Access Point is using local mode and I configured interface group for VLAN Select. But somehow I need to change the AP from local mode to flexconnect, but seems the WLAN to VLAN mapping in flexconnect group is a 1:1 mapping. May I the Flexc...
Hi allIn Wired dot1x, we can configure the reauthentication timer in the suppliant to reauthentication after a certain period of time, so anyone know if we can do the same in Meraki in Wireless AP with dot1x authentication? Say reauthenticate the WIF...
Hi allThere are two models in Cisco 3850 - C3850-24XU and C3850-12X48U to provide Multigigabit connection 24 and 12 100Mbps/1/2.5/5 and 10 Gbps connections respectively. So may I know anyone here tried to connect the 10G-T connection in the Server to...
In 9800 WLC, there is a feature called VLAN group to do the same as VLAN select, but it stated Flexconnect is not supported. But I cannot find VLAN Select talk about this kind of limitation.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/9...
The WLC is 5520 and the OS is 8.9.x
Why I need to do local switching instead of centralized switching because we are experiencing a connectivity issue in central switching, but no issue if I change the AP to Flexconnect; that means traffic is local s...
I checked already, but no luck, so want to see any expert here know to configure the reauthentication timer or any default value of the reauthentication in Meraki.
Other WIFI manufacture implemented reauthentication timer, so the AP will perform reauthentication to the client when timer expired. So we would like to know if Meraki also has this timer? or it has a default reauthentication timer?
