About jasonfilley

jasonfilley · 07-17-2012

Can the SG500 filter intra-VLAN traffic, with protected ports? Example:VLAN_30_Clients (10.20.30.0/24)VLAN IP = 10.20.30.254Clients = 10.20.30.{1-100} ( ports 1-5, trunked, protected [VM's])Clients should be ACL'ed (e.g., tcp 80 only, between each o...

jasonfilley · 07-20-2012

I was looking for an equivalent option to segregate and filter intra-VLAN traffic, like VACLs or ACL via SVI. e.g., http://www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a008013565f.shtmlFor future inquiries, then, would it be...

jasonfilley · 07-18-2012

With Proxy ARP and a couple of beers, anything is possible...Ports trunk VLAN containing VM's on backup network, and I only want them to have access to/from backup server (not view each other). Easy enough: make sure the backup server (same VLAN) is...

Member Since	‎07-17-2012 01:59 PM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	3

User Statistics

User Activity

Intra-VLAN filtering with protected ports

Re: Intra-VLAN filtering with protected ports

Intra-VLAN filtering with protected ports