About SteveT12

SteveT12 · 01-22-2026

I have two new Cisco 220 M7 servers not showing up in UCS Manager. UCS Manager firmware is 6.0.1E and the server is 4.3.6a.0. They are connected to the UCS Manager FI (6454) with a 25GB twinax connection on port 1 of the VIC 15425 on both servers. Th...

SteveT12 · 09-12-2022

I ran into and APD after I migrated from 4.2L to 4.2(2a). Here's the info: APD BackgroundAfter the upgrade on Friday (9/9/22), the “Firmware Auto-Install” process did not turn “Auto Evac” off. I had to manually turn off “Auto Evac” after the firmwa...

SteveT12 · 02-09-2022

How can you tell what vNIC or vHBA is actually being used in UCS? How can you tell what device is primary and what is secondly? Also, how do you see the usage?

SteveT12 · 01-26-2026

The new C220 M7 Servers were hiding in the "Decommissioned" tab for some reason. Very strange.

SteveT12 · 01-26-2026

Hi Kirk, I have only port 1 connected to the FI right now. I will hit reset to factory defaults to see if this helps.

SteveT12 · 09-13-2022

@Steven Tardy The datastores are located on a FC SAN. The Cisco Mini (6324) connects two fiber connections to a SAN switch. The UCS infrastructure software is compatible with 4.2(2a) and I upgraded the servers to 4.2(1n). I verified the infrastruc...

SteveT12 · 02-14-2022

Hi Kirk, You're right.. definitely needs clarification. Lets say I for simplicity's sake I deploy 2 vNICs to my service profile (vNIC0 and vNIC1- on same VLAN). The first one, vNIC0, is connected to Fabric Interface-A path and vNIC1 is connected to ...

Member Since	‎07-27-2018 01:07 PM
Date Last Visited	‎06-16-2026 07:01 PM
Posts	7

User Statistics

User Activity

Cisco 220 M7 servers not showing up in UCS Manager

All Paths Down Upgrading Firmware from 4.2(1L) to 4.2(2a)

Managing vNICs and vHBA's

Re: Cisco 220 M7 servers not showing up in UCS Manager

Re: Cisco 220 M7 servers not showing up in UCS Manager

Re: All Paths Down Upgrading Firmware from 4.2(1L) to 4.2(2a)

Re: Managing vNICs and vHBA's