I've tested Association ACLs in 12.3(2)JA and JA2 and they are not working. They work fine in 12.2(15)JA and earlier releases. Has anyone else had this problem?

Having problems with a Symbol 802.11b handheld connecting to the 802.11g radio of an AP-1200 using 12.3(2) firmware. When 1, 2, 5.5, 11 Mbps data rates are enabled on both the station and AP and only 5.5 is set to basic, the station will not associa...

Why does the CB21AG card not support these settings like the 350 and CB20A cards do? These settings are VERY important in my environment.

The 802.11 standard specifies use of PS-Poll frames for use in Power Save mode. The Cisco 802.11b and 802.11a cards operate exactly according to the standard, which is good. Once they enter Power Save mode, they stay in Power Save mode, but look at...

I have a 3005 Concentrator on which I'm running WebVPN services. I have a 827 DSL router in front of it, and everything works fine for remote users. I need to have a server sitting on the LAN behind it browse through it for Internet access. I set the...