About sdeva1986

sdeva1986 · 01-28-2009

Hi,I will start off by saying that i only have experience with small - scale (2106 WLAN Controller)unified wireless network setup. So, i was wondering what factors do i need to take into consideration while setting up a Medium - Large scale Unified w...

sdeva1986 · 07-27-2008

Hi,How can i downgrade my 1131AG Light weight access point to autonomous mode(which IOS should i use?). Any documentation or comments will be helpful.Thanks in advanceRegardsSri

sdeva1986 · 07-22-2008

Equipments being used:1) Cisco 2106 WLAN controller2) Cisco 1131AG access points (LWAPP mode)3) Cisco catalyst 2950 switchHi, My setup is as follows:My access point is registered with the WLAN controller via the switch. When i try to change the m...

sdeva1986 · 01-29-2009

Hi,Thank you for the reply. I have one more question relating to what you mentioned. When you say site survey done by the engineer does the survey involve a set of procedure (if yes, then what kind?) or is it through experience that he determines how...

sdeva1986 · 07-28-2008

Thank You for the helpNow, i can finally setup my mesh network 

sdeva1986 · 07-28-2008

Hi, I tried all of the above steps. But i still have the same problem. I completely erased the IOS in the access point and tried loading c1130-rcvk9w8-tar.124-10b.JA3 [12.4(10b)JA3] (which is the latest IOS version)using the same steps and it worked...

sdeva1986 · 07-27-2008

Hi Rob,I used the TFTP server to revert back to the previous release. I followed all the steps exactly as mentioned in the document. I changed the IP of the PC to 10.0.0.8. I renamed the IOS image files as c1130-k9w7-tar.default. I even disabled all...

Member Since	‎07-22-2008 10:03 PM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	7

User Statistics

User Activity

Wireless LAN Controller

Downgrading a AIR-LAP1131AG-A-K9

Mesh networking

Re: Wireless LAN Controller

Re: Mesh networking

Re: Downgrading a AIR-LAP1131AG-A-K9

Re: Downgrading a AIR-LAP1131AG-A-K9