Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,I have a question regarding rogue detection configuration on WLC. we know that rogue detection can be enabled on a per AP basis under the advanced tab of each AP, starting from code 6.0, and it also supports rogue detection in RF groups when w...
ok, i have done some further tests and results are not consistent, this time I could not get the other AP detected as rogue no matter what changes I have made...when I selected AP authentication with threshold value of 50, and different RF group nam...
hi Amjad,so based on your test result, does that mean you if AP authentication policy is configured as "none", then it seems rogue detection is off? in my test, I do not have that many of APs connected to the WLC however I have got two test APs sitt...
I have done some tests regarding rogue detection, and here are some of my findings:different RF group name, with AP Authentication policy on both WLCs selected to "none": rogue will be detecteddifferent RF group name with AP Authentication policy on ...
can anyone please help to confirm what is the difference between "none" and "AP Authentication" under "AP Authentication" configuration option?appreciate any comment on this.
hi Saravanan,ok if mobility group/list configuration is not considered as a factor for rogue detection, can you please help to explain what is the difference between "none" and "AP Authentication" under the AP Authentication configuration?when we ha...
