Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a RV220W operating in 2.4GHz N-only mode. Channel bandwidth is set to 20MHz, channel to 6 (a site survey shows that channel as completely clear), WPA2/AES. I am connected to a TrendNet wireless bridge. The admin page for that wireless bridge s...
Has anyone managed to access the admin page of the RV220W from an iPad wih the default security certificate? If so, what steps did you go through? Or is this only possible when purchasing a certificate? Thx...
I am running firmware 1.0.2.1 on my RV220W. I'd like to enable the UPnP service for automatic opening of ports as needed. According to the Admin guide the UPnP service can be enabled from the Firewall > Basic Settings > UPnP page, but I don't seem to...
I have a RV220W (running firmware 1.0.0.26) with the default VLAN 1 enabled. The LAN IP address is 192.168.22.1, with IP range 192.168.22.0/24. DHCP service is enabled with range 192.168.22.100-192.168.22.199. Inter VLAN is enabled for VLAN 1.I also ...
I am using an SPA525G with a 3CX PBX. Since I let the PBX handle the outbound rules, my dial plan on the phone is very simple: [x*].I have the 3CX Skype Gateway installed so I can call Skype user IDs. In the phone book on the phone I enter a number a...
Oh..never mind...looks like this is a known issue. Why does it take so long for new firmware to appear with these issues fixed???https://supportforums.cisco.com/message/3353382#3353382
OK thx, appreciate your reply. Good to know the dial plan only affects digits, no need for me to waste any more time on trying to get that working.I can try the format you suggested, but it really doesn't solve my problem. Using the format skypeid@sk...
Right. Here's hoping that will be changed in a future software update. Some people may be using this phone with SIP for Skype, or some other gateway to Skype (such as 3CX), and in that case you'd want to be able to dial Skype user IDs.
