Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Running 2 concentrators load balanced. For some reason both show a static route to the default gateway, but 1 should be routing to the tunnel default gateway. Is their an easy way to determine where it is picking up this static route? Both do have th...
I've setup our Pix 515's to allow remote access. Locally we are in the process of migrating users between 2 networks. We can access the remote hosts from the old local network, but not from the one we are migrating to. I don't know if it has somethin...
Neither send it to the tdg, they both send directly to the dg, hence my problem. Like I said, the tdg is set properly on both concentrators. Somehow the one not decrypting is picking up a static route pointing to the dg.
The dg and tdg are set correctly, but both concentrators send traffic for certain networks to the dg, while 1 should be sending it to the tdg. Some networks work just fine.
Ok, I've been digging through the posts and will try the following. Addingcrypto isakmp nat-traversal and changing the nat pool to something in the 172.x.x.x network.I'll post something after I've tried that.
