Running 2 concentrators load balanced. For some reason both show a static route to the default gateway, but 1 should be routing to the tunnel default gateway. Is their an easy way to determine where it is picking up this static route? Both do have the proper default gateway and tunnel default gateway set in the configuration.
I am not sure I follow your question, for instance both should have a static route to the default gateway if so configured, the tunnel default gateway should be configured on these 2 boxes too and each concentrator should forward the respective traffic to the DG or TDG. What is your problem on this?
The dg and tdg are set correctly, but both concentrators send traffic for certain networks to the dg, while 1 should be sending it to the tdg. Some networks work just fine.
Neither send it to the tdg, they both send directly to the dg, hence my problem. Like I said, the tdg is set properly on both concentrators. Somehow the one not decrypting is picking up a static route pointing to the dg.
Learn, share, save
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
