Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I have a customer link at a remote location in india and the link distance is 17KMS on the road , there is a clear line of site for both ends , we are still working on the bring up the link i am an error saying "cannot associate no responce" pleas...
Hi,We have a customer link for a distance of 10 kms outdoor installation, for the past two days the link is slow, suspect antenna alingment and asked the customer to observe ,attached is the link status can you suggest for better performance.
hi,We need to upgrade cisco 1200 with ISO version 12.3 to LWAPP, i have downloaded the LightweightMode Upgrade Tool and the upgrade image , i suppose the upgrade will happen with the help of controller can you please guide.(we dont have the controlle...
We use Cisco1310 at our customer location; the units are installed in the outdoor for a distance of 4 KMS, with external antenna. The link is slow and the TTL on the Ethernet is not stable, the SSID and the WEP key is applied for 40 BIT encryption, t...
Hi Leo,The Link problem has been fixed, we found the problem in the antenna alignment at both ends, the same has been fixed and many thanks for your support , if you have any guide line document for basic installation and trouble shooting on 1300 kin...
Hi Leo,Regret the incorrect information.As per your suggestion and my findings the antenna was not aligned properly to the other direction, we did the same and the link was associated only once Mean while the height of the tower (100 feet) from groun...
Hi Leo,Thanks for your feedback , i have checked the same at the clients place andwe had the link associated only once , we are working on a permanet resolution will update would there be any other possibilities apart from antenna for this error "can...
Hi Leo,Thanks for your reply , We did the bench test and got confirmed that the devices are working statifactory We are trying to reduce the distance and look at the possibility, meanwhile if you can help under what circumstances does "Cannot Associ...
Hi We have a Customer Link for an Airdistance of 15Kms with clear line of site and the issue is we are unable to establish the link, we are still working on to fix the problem, we have a common error as " cannot associate no responce "at the NON-ROOT...
