Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a wlc 4404 and 1131 LWAPPs distributed in my environment. Currently using WPA/PSK for user authentication. I receive These messages in the controller monitor:Client Association: Client MAC:00:15:70:a8:88:b6 Base Radio MAC :00:1d:a2:84:9a:80 ...
I have a new WLC configured and 12 LWAPPs installed at my office. I have an ACS configured as well as IAS for aaa auth. I've noticed that many wireless laptops roam between 1 to 3 different LWAPPs. This is odd, especially because some devices are ...
Yes I have done some testing with WPA and Radius authentication. I had to disable this wlan and halt testing due to a few b-radio barcode printers that would default away from PSK and try to authenticate, causing the printers to fail when attempting ...
Sorry, I forgot to include the port channel settings.interface Port-channel10 switchport switchport trunk encapsulation dot1q switchport mode trunk switchport nonegotiate no ip addressexitinterface Port-channel11 switchport switchport trunk encapsula...
We set up 2 440s's in LAG using ether-channels. Here is an example of our configuration for the ehterchannels and the ports.interface Port-channel10 switchport switchport trunk encapsulation dot1q switchport mode trunk switchport nonegotiate no ip a...
Yes, we are a Dell shop using both Intel Proset and MS wireless tools. The previous changes I made did not improve my environmet. Further research has led me to WPA2 and the Proactive Key Caching (PKC), a feature added to WPA2 that permits wireless...
