About zamribesar

zamribesar · 08-19-2008

Good morning,Our company is using Gigabit Ethernet interface to connect to our ISP, which rate limit 155 Mbps. Although we're able to connect to them, but we have high input errors and input overrun, but zero output errors and overrun.Attached docume...

zamribesar · 08-14-2008

Good day!I would like to seek advices regarding to Cisco Firewall Module [WS-SVC-FWM-1] and IPv6 network.At this moment, our server farm is capable to support IPv4/IPv6 network, and our servers are starting to use both to serve our end-users.My quest...

zamribesar · 08-19-2008

Is it possible to test again by:copy tftp://ipaddress/asdm-6112f.bin flash:asdm-zamri-

zamribesar · 08-19-2008

Thank you. :)-zamri-

zamribesar · 08-19-2008

So, if we have 155 Mbps, then it will be:Bits per second = MBits*1000000 = 155000000Normal burst bytes = (Bits per second)/8*1,5 = 29062500Maximum burst bytes = (Normal burst bytes)*2 = 58125000e.g:interface gigabitEthernet 0/3rate-limit input 155000...

zamribesar · 08-14-2008

Dear Mr Farrukh,Thank you very much for the above info. I'm checking and reviewing it now.-zamri-

Member Since	‎08-14-2008 08:40 AM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	6

User Statistics

User Activity

Gigabit Ethernet High Input Errors and Overruns

Cisco Firewall Module [WS-SVC-FWM-1] & IPv6

Re: FWSM 3.2(7) TFTP to Flash Errors

Re: Rate-limit

Re: Rate-limit

Re: Cisco Firewall Module [WS-SVC-FWM-1] & IPv6