About cbeaufoy

cbeaufoy · 07-15-2008

Cisco 4404 WLCAP 1240 - LWAPWireless client receives a DHCP address from central DHCP server fine.Unable to route outside of own subnet - Continuous ARP WHO HAS (Default Gateway addr) TELL (client IP) messages being receivedWLC running OS 4.2.99.0If ...

cbeaufoy · 07-17-2008

Hello,Everything was correct, subnets, gateways etc. all as they should be.The issue was caused by the WLAN AP Group Name being too long! I only discovered this as a last resort and as soon as i gave it a simpler name the problem dissappeared.I've ha...

cbeaufoy · 07-16-2008

The subnet on the MetaIP DHCP server is 71.0/25 with DG 71.1This is correct on the client machine when assigned using the WLC as a relay.It also works fine when using autonomous AP's and the MetaIP server.This has really got me foxed and i've request...

cbeaufoy · 07-16-2008

Thanks - yes both mgr and ap-mgr and on vlan 1 (untagged 0)The attached config is how i left it with a locally configured WLC DHCP scope working.

cbeaufoy · 07-15-2008

Tried that - but without the proxy enabled it can't get a DHCP address is any case.

cbeaufoy · 07-15-2008

Yep - timeout.And loads of ARP who has 'default-gateway' messages

Member Since	‎10-25-2001 07:25 PM
Date Last Visited	‎08-18-2017 03:50 AM
Posts	10
Total Helpful Votes Received	5

User Statistics

User Activity

4400 WLC - AP Client routing issue

Re: 4400 WLC - AP Client routing issue

Re: 4400 WLC - AP Client routing issue

Re: 4400 WLC - AP Client routing issue

Re: 4400 WLC - AP Client routing issue

Re: 4400 WLC - AP Client routing issue