About frederickduester

frederickduester · 08-31-2015

Hi,We have 2 6509-E switches configured with VSS. Because of a strange bug in Cam-Table we have to make an IOS-Upgrade.We want to go from version s72033-ipservicesk9_wan-mz.122-33.SXI5.binto version s72033-ipservicesk9_wan-mz.122-33.SXJ10.bin. I hav...

frederickduester · 06-17-2021

I already configured that but it dosen't work. The inside interface (vlan10) was not evan pingable, so i configured this command via FlexConfig: management-access vlan10 After that i was able to ping the inside interface vlan10 via VPN tunnel but FDM...

frederickduester · 06-17-2021

Yes, but only when i manage the FTD device via FMC but i wan't to manage it via FDM. The FP 1010 device will be installed at a remote office and builds up a VPN S2S Tunnel to the main Office. I wan't access the FDM over the VPN tunnel.

frederickduester · 06-17-2021

Hi, did you ever found a solution for this? I have the exact same problem. VPN Tunnel is up an running but i can`t connect to FDM via the VPN Tunnel.

frederickduester · 08-31-2015

Hi,I looked again in the excel sheet and i have seen that we can go from version:s72033-ipservicesk9_wan-mz.122-33.SXI5.binto versions72033-ipservicesk9_wan-mz.122-33.SXI14.binwith ISSU and then are able to go from version:s72033-ipservicesk9_wan-mz....

Member Since	‎08-31-2015 03:16 AM
Date Last Visited	‎09-13-2022 02:42 AM
Posts	5

User Statistics

User Activity

IOS upgrade for VSS 6509-E

Re: Access remote FTD using FDM via outside interface

Re: Access remote FTD using FDM via outside interface

Re: Access remote FTD using FDM via outside interface

Hi,I looked again in the