Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello Everyone! I have two types of RF cables AIR-CAB005LL-N and CAB-L400-5-N-N According to specs AIR-CAB005LL-NN(m)-STR to N(m)-RALMR-400, 5 foot RF cableType: outdoor DB (direct burial) CAB-L400-5-N-NN(m)-STR to N(m)-RALMR-400, 5 foot RF cableTyp...
Hello Team. We are trying to implement an idea of daisy chaining WL+IP Camera.The idea is to power up a IW3702 by power supply, and connect an IP Camera to PoE out port, the problem is that camera should be in another vlan. For example AP in vlan 333...
Hello. Have IW3702-2E with x4 AIR-ANT2568VG-N 2.5/5.0Ghz 6/8 dBi Omni antennas.AP is in autonomous mode ap3g2-k9w7-tar.153-3.JI4.tar. I have run several copy test`s;2.4ghz I can connect 144Mbit only, cause there is only 20Mhz mode available, and real...
Hi. I`ve setup 1562E on wlc 5500, i connect to AP 866.7-780Mbps. But the transfer speed is awful.Download speed vary from 2-7mb/s, when working in 802.11n i get better download speeds 12-14 mb/sTransmit is somewhere around 20 mb/s Receiving/download=...
This mean client got 409.6 Mbps (51.2x8 -> convert bytes to bits) throughput in average. If your data rate is 780Mbpsand you got 409.6 Mbps throughput, that is normal. You will never come close to 780Mbps value in throughputI do not remember exact...
Hello, Thank You very much for clarification, but the question is about real speed, throughput, bandwidth or what ever, currently it does not really matter how to call it.
