Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all,
I am trying to set up dynamic dns on the router. The feature does not seem to be available as it was on the Cisco 800/1900 series models. We need this as the router connects via 4g but the IP is not static so the IP changes with re-connecti...
Hi All,My internal networks are 10.113.0.0/16 subnetted down into variable length networks. The inside interface is sat on 10.113.66.7/24 with a gateway to the rest of the internal network via a cisco 3750 on 10.113.66.1 I have NAT exempted the inter...
Hi All,I have been racking my brains and no doubt am further from the answer now than when I started. I have two 5510s in a/s working fine but cannot get a response from ASA to client once the vlan on ethernet0/2(2.2) pinged (from ASA).Int 0/2 vlan 2...
Am I mad? I tried to upgrade this base ASA device so I could make use of the Gigabit Ethernet which should work after the upgrade. I completed the license upgrade in the GUI and it was accepted see attached. I still have no GBe ports and the license ...
thanks Grant,The source/destination are on the correct interfaces with the correct security levels - 0 and 100, the only weirdness is the 192.x.x.x and 10.x.x.x - the 192.x.x.x is a BT router on and ADSL circuit, it is doing the NAT for the external...
all-thanks for your responses, now you can all have a laugh at the fact that in spite of all Vista's good points! Switching off the firewall/av still leaves a service running which prevented the round trip of the ping I was initiating. Back to basics...
excellent, completely forgot about the appended bin file in boot, so pointed to 803, having reloaded 7.11/7.12 etc all the way up to 7.24 (time wasted, lol) anyway working fine - thanks again for your assistance on this one.
thanks v much Sushil, I guess I now have to upgrade to the 2 major release following 7.0(8)and then to 7.2..?If the IOS works the same as routers, can you confirm this is the process, I only bought the ASA two days ago and Cisco won't support me beca...