Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, allWe have a CISCO2811 router, and we have added a HWIC-4ESW module into it. We have registered a DNS at the DNS registration (www.test.com 69.64.178.130), we have translated the 80 and 443 ports of 69.64.178.130 to 192.168.10.3(our web site IP ...
Hi, allWe have a CISCO 2811 router, and we have assigned the 69.65.187.124 to one interface, and 192.168.1.1 to another interface. Then we have configured the NAT-translate the http and https access of 69.65.187.124 to 80 and 443 port of 192.168.1.3(...
Hi, allWe have an ASA 5510 firewall, and we plan to change its power cable and power off it. How do I save its current running configuration to avoid its currnet running configuration lost?Thank you!
Could you help meWe have a CISCO 2811 router, its an interface connects to the external network and assigned IP 69.64.188.136;its another interface connects to internal switch and assigned IP 192.168.1.1;We have configured the NAT/PAT at 2811, redire...
I can access the Internet from the new web server. And I can access the new web server using the remote desktop (the PAT 69.64.188.136:3389 to the 3389 port of the new web server)The VLAN1 should be 192.168.2.0/24, not the 192.168.20.0/24.We have pur...
Hi, CollinI run the "show ip nat trans" after I accessed the new web site, I got the following output:tcp 69.64.188.169:80 192.168.2.3:80 --- ---When I access the old web site (the external IP is 69.64.188.130, the web server's internal IP is 192.168...
Hi, CollinYou mean I need to remove the secondary IP address (69.64.178.137 255.255.255.224), and reserve the PAT (from 69.64.178.137 to 192.168.2.0/24), right?
Thank you!I have found there is "Save Running Configuration to Flash" option when I use the ASDM. If the current running configuration lost after the ASA5510 power off and restart if I save the running configuration to Flash.Thanks