Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
The following cheat sheet walks through the installation and configuration of the Nexus 1010. The following components will be described in this cheat sheet as well Nexus 5500, Nexus 2200, Nexus 1010, UCS C-Series servers and FCoE technology.
Hello,
Not sure if you have what you needed but for customers we have seen deploying multiple DVS within the same vCenter server/Data Center, you "should" create 2 separate VMM Domain. Create one for Cluster1 and another VMM Domain for Cluster2.
I...
Yeah that will be a problem with your VSB Domain ID is the same as the 1010 Domain ID. If the control vlan was different then it probably would be alright but as a best practice, probably want to use a unique Domain ID for your 1010 and VSB (i.e. VS...
Can you ask your customer to provide the output on what he is asking regarding the ports? It sounds like they are referring to the port-profiles of type vEthernet, which are for Virtual Machines on the ESX/ESXi servers. If you can provide that, it ...
Yes I would definitely open a TAC case and they can help you rebuild it. Since you are able to get to the console (i.e. CIMC connection), the 1010 allows to remote boot from an ISO image. So TAC will be able to help here.Cuong
Have you call Cisco TAC on this? They can help rebuild that 1010 via a remote ISO image to boot instead of physically going to the site to place a CD ROM into the 1010. It sounds like the image on the 1010 is either missing or corrupted and can't b...
