I have:ASA 8.3ASDM 6.3When creating a connection L2L we have the option of using a CONNECTION NAME or choosing to use the IP address. When a connection name is used their are problems establishing the L2L session- if the IP address is used for th...
My first time using this service ... please be gentle.I recently setup a vpn anyconnect for a specific application. My question, if I use the command " show conn"VPN01# sh conn | i 172.18.7.36UDP Outside 172.18.7.36:1123 DMZ_ADM 10.7.16.57:81, i...
Hi Paul,Sorry for not getting back to you sooner...I finally got a chance to open a TAC with Cisco and the explanation given was that the CONNECTION NAME is used when the remote site is using DYNAMIC IP as its PEER address.Here is the config I was re...
Thanks Paul,I understand what your saying - you are agreeing with me that on a L2L the connection name has to be the IP address. Now that we have agreed. On the L2L we have two fields:1. Peer IP adress2. Connection NameAre we saying that the option...
Hi Jennifer,I want to thank you for help... What I seem to conclude is that when I use the " show conn" and the sessions that I am observing are UDP sessions, I need to use the options " detail" to determine if I have a true UPD session or simply ...
Hi Jennifer,Today I did some more testing:I had a PC running an application that was trying to establish UDP sessions on port81.The other PCs were all not connected.Result:When I do show conn on my vpn ASA5520 is see UDP sessions to the non connec...