About d.merry

d.merry · 05-15-2007

I have a PIX 515e that I'm having problems connecting to. We recently changed our network IPs. I believe there are a couple of configuration changes that I need to make to connect via the ASDM or to telnet. So I'd like to connect via the console t...

d.merry · 04-25-2007

I need to convert the IPs for the largest part of our network from 172.30.0.0 255.255.0.0 to 172.20.6.0 255.255.252.0. I'd like to migrate it in 'sections' at a time instead of all at once. I have a spare Cisco 2621 w/ 2 ethernet interfaces. Could...

d.merry · 04-11-2007

I have a 1601 router running ver 12.0. The ethernet interface is half duplex. Can it be set to full duplex?

d.merry · 03-28-2006

Recently upgrade a PIX 515e from 6.34 to 7.12. Everything seemed to worked ok, but having a problem accessing some web sites. Basically, we allow all IP traffic from the 'inside' network. Some errors from log are:609001: Built local-host outide:19...

d.merry · 02-22-2006

We currently have 2 firewalls at our site, each w/ there own public IP. One is a SonicWall (used for VPNs for a specific department as required by a 3rd party) and the other is a Cisco PIX 515E - restricted (used for other VPN connections and all ot...

d.merry · 03-28-2006

here's the config....

Member Since	‎02-21-2006 11:31 PM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	6

User Statistics

User Activity

connecting to PIX 515e to configure

migrating to new ip addresses

1601 router - setting to full duplex

problems after Pix 515e upgrade from 6.34 to 7.12

PIX 515E-restricted, are multiple 'outside' ports possible

Re: problems after Pix 515e upgrade from 6.34 to 7.12