About lovingaditya28

lovingaditya28 · 12-14-2011

Hi Experts,We have two Sites:Site A has CISCO 2960 192.168.5.0/24Site B has CISCO 2960 192.168.51.0/24For Both the sites we got point to point line 10Base T with capacity of 10 Mega bits per second (As this is a 10Mbit/s Point to Point circuit, there...

lovingaditya28 · 12-15-2011

Hi Latchum,Please suggest if you meant the below:CISCO at SITE A:interface Vlan20description Vlan 20 towards site B10 Mb lineip address 192.168.89.1 255.255.255.0interface GigabitEthernet0/20description P2P link to siteBswitchport trunk encapsulati...

lovingaditya28 · 12-15-2011

Hi Engelen,Please see if you suggested this to me:cisco1 at SITE A:configure terminal(config)#vlan 20(config-vlan)#name VLAN0020Transport(config-vlan)#ip address 10.1.1.1 255.255.255.248(config-vlan)#ip route 192.168.5.0 255.255.255.0 10.1.1.2(config...

lovingaditya28 · 12-15-2011

Hi Srikanth and Engelen,Thank you so much for your reply, We have cisco 2960 at both ends and no router.On Site A subnet is 192.168.5.0/24 and ON Site B subnet is 192.168.51.0/24Please suggest if this is possible to connect this line with cisco2960 a...

lovingaditya28 · 12-15-2011

Hi Experts,Please reply on my query, i need to impliment this point to point line. What is the best way to configure this line.Thanks Pankaj

Member Since	‎12-13-2011 09:22 PM
Date Last Visited	‎08-18-2017 03:50 AM
Posts	5

User Statistics

User Activity

How to configre point to point connection

How to configre point to point connection

Re: How to configre point to point connection

How to configre point to point connection

How to configre point to point connection