Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have an office that is having serious issues with the rekeying of their VPN tunnel. They are Windows 7 users using the built in VPN on their laptops. They are connecting to my ASA 5505 8.0(4)8. Their VPN drops as soon as the SA re-key is trigure...
I use to have a NetGear FVS338I installed ASA 5505 two weeks ago.This new firewall must have some timeout settings that the old NetGear didn't have.I use Microsoft Reporting Services on my webserver that is behind this firewall.I have a report that t...
I replaced my NetGear FVS338 with ASA 5505 on my web server network. So now I have ASA 5505 on both of my networks.Exchange server: 192.168.0.1Web Server: 192.168.1.10Site to Site VPN is working.RDP (Remote desktop) is working.AVG Virus software man...
Ok - well just coincidence that I put a new firewall in. Turns out my data is getting very large and found this article to fix the issue:http://support.microsoft.com/kb/825739Increasing the timeout from this articel solved the problem.Time to work o...
I set the logging to debug mode.There are no errors or anything, but the report is still timedout.One thing I did notice is that the TCP build and teardown happens every minute during the connection. You get one line saying Built Inbound TCP connect...
Thanks for the response...I set all these to 10 minutes and it still timesout at 2 minutes. Do you have to Reboot the firewall for this to take affect? If so I have to do it after hours.
Thanks - I figured it out - was a rights issue on the Exchange Server - nothing to do with firewall.Once I knew it wasn't the firewall, made it a lot easier to find.
