Hi Experts,
I am trying to connect a Linux Server with 2x10Gbps to a pair Nexus switch as shown below :
The bonding itself is using Mode 1 Active-Backup, between Nexus switches there is a vPC peer-link, and these Nexus switches are connected t...
Hi Manoj, Thank you very much for your info. Just want to check one more thing, even though the passive nic status is disconnected, does port-channel 1 of Nexus-2 still learn the mac address ac1f.6bab.74c3? Where i can find the article/doc that expla...
Hi Manoj, Sorry for late response, just want to check with you. In my case, if the Active NIC connected to port 16 Nexus-1, this port 16 of Nexus-1 will learn the mac address ac1f.6bab.74c3 meanwhile in Nexus-2, mac address ac1f.6bab.74c3 will learn ...
Hi Manoj,
Here the result from both switch :
Nexus 1
sh mac address-table interface eth1/16Legend: * - primary entry, G - Gateway MAC, (R) - Routed MAC, O - Overlay MAC age - seconds since last seen,+ - primary entry using vPC Peer-...
Hi Manoj,
Thank you very much for your reply, the configuration is simple :
on Nexus, ports that connected to the server is only access port and assign to one VLAN.
Nexus-1
interface Ethernet1/16 description switchport switchport access vlan...