About Rajesh Kumar Reddy

Rajesh Kumar Reddy · 08-04-2024

Hello team, I have a 9800 WLC in my setup where one of the SSID is configured for .1x authentication, Since yesterday users are unable to authenticate via Radius for this SSID. There was ("No config changes was done on Radius, Switch or WLC), No Firm...

Rajesh Kumar Reddy · 01-12-2024

Hello Team, we are facing a strange issue that we have C9130 access points where they reboot automatically reboot for every 20 days but not all the time and becomes stable. When I checked on the AP logs it shows as below. CHBGBFRONAP003#Jan 10 12:24...

Rajesh Kumar Reddy · 11-28-2023

Hello TeamI have a client who has C9800-40 WLC deployed with 9130 access points associated to it. clients complain that though their laptops support 802.11ax still they are getting connected to 802.11n only. They are now requesting to disable this 80...

Rajesh Kumar Reddy · 11-01-2023

I have two C9800-40 WLCs on HA with C9130 access point models, when the client laptop is connected to Wi-Fi, the one which connected over AC shows max speeds of 140 or 180mbps and the one which connected on AX show 574mbps max speeds. Channel width i...

Rajesh Kumar Reddy · 08-07-2023

Hello Team, I have a scenario where my clients are getting athenticated via 802.1x from ISE server. Out of 30 users only 5-10 client devices are experiencing long duration for connecting to Wifi network (SSID) this issue. Below given logs are FYR Ki...

Rajesh Kumar Reddy · 08-05-2024

Thank you JPavonM, It was issue with EAP certificate. We have remapped the certificate on the radius server and users started authenticating.

Rajesh Kumar Reddy · 08-05-2024

Thanks alot for the support Rasika. This worked for me post remapping the EAP certificate on the Radius server.

Rajesh Kumar Reddy · 08-04-2024

Hello Rasika Nayanajith, Thanks alot for reply. Could you let me know if you refer to any EAP certificate ? If so should the new one generated on WLC or radius or suggest if something else. Thanks Rajesh

Rajesh Kumar Reddy · 11-29-2023

Thanks alot for your reply. However I have seen the below command which disables the 802.11n Device(config)# no ap dot11 5ghz dot11n Will this work ? Also as you suggested, On the WLAN and RF what will be your suggestions that should be verified in...

Rajesh Kumar Reddy · 11-29-2023

Hello JPavonM, What do you mean ? Is it not possible to disable the 802.11n on the WLC GUI ? If so, Do you have any doc as why this is not possible or if possible kindly suggest how to do it Many Thanks.

Member Since	‎12-06-2018 10:00 PM
Date Last Visited	‎08-07-2024 01:09 AM
Posts	17
Total Helpful Votes Received	2

User Statistics

User Activity

Users are unable to authenticate from Radius server - cisco 9800 WLC

9130 APs are rebooting for every 20 day's

How to disable 802.11n in cisco 9800-40 WLC

Client experiencing slowness in data rates on wireless

Client is experiencing long duration for connecting to Wifi network

Re: Users are unable to authenticate from Radius server - cisco 9800 W

Re: Users are unable to authenticate from Radius server - cisco 9800 W

Re: Users are unable to authenticate from Radius server - cisco 9800 W

Re: How to disable 802.11n in cisco 9800-40 WLC

Re: How to disable 802.11n in cisco 9800-40 WLC