Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Are there any plans to update the FWSM code to support features similar to the ASA/PIX 7.x code? Features such as WebVPN, SVC and intra-interface traffic are some features that come to mind.
When enabling syslog logging on the VPN 3005 Concentrator, there is only the option to log levels 1-3. On the VPN 3002 Hardware Client, there is only the option to log levels 1-6. Since level 7 is debugging, how can you get this level of logging fr...
I've used that form before and so I'm familiar with its use. However, I need to be able to redirect one port from the translated address to a different port on the inside address AND have this only happen only when the traffic is being sent from one...
mlenco,This is almost what I am looking for. The only modification I need to this is that I need to add port redirection to the static policy PAT you have shown above. For example, I need an external source IP address to be able to send FTP traffic...
I'm still new to the 7.x code, but I've had to permit ICMP echo replies back in through an ACL applied to the outside interface in the past with the 6.x code on a PIX. Could this possibly be the problem? If so, it doesn't explain why it worked yest...
When you say "outbound access" do you mean that the destination host is on the Internet, or does "outbound access" mean access from the Internet to an inside host? If it's the first meaning, do you have an access list applied to the internal (higher...
