Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all Sorry if this is a really simple question, but i will have limited time with my new equipment to test before i must deploy. I will be setting up 2 x WS-C3650-24TD-S switches with a very basic configuration. A single VLAN needs to span across t...
Massive thank you for your help Sergey, I owe you a beer Ok, I have since checked and a firewall was blocking a Ping command. Sw1 now working fine. I then allowed switchport mode access on Sw2 and it appears it is supplying IP addresses and I can re...
ok, done.No IP conflicts being flagged. But still doesn't seem to work...Cannot ping devices on either switch.Switch1#show mac address-tableMac Address Table-------------------------------------------Vlan Mac Address Type Ports---- ----------- ------...
And this is how Switch2 looks:Switch2#show interface trunkPort Mode Encapsulation Status Native vlanTe1/1/3 on 802.1q trunking 100Port Vlans allowed on trunkTe1/1/3 100Port Vlans allowed and active in management domainTe1/1/3 100Port Vlans in spannin...
Switch1#show interface trunkPort Mode Encapsulation Status Native vlanTe1/1/3 on 802.1q trunking 100Port Vlans allowed on trunkTe1/1/3 100Port Vlans allowed and active in management domainTe1/1/3 100Port Vlans in spanning tree forwarding state and no...