type this for password recovery.switch: flash_initswitch: load_helperswitch: rename flash:config.text flash:config.oldswitch: bootafter the switch boots and you are at the enable prompt, type this:switch# rename flash:config.old flash:config.textSwit...
It will ask you tftp server address after you get past this issue.does the "dir system:" command show the running-config file?have you tried "copy start tftp"?could be that the NVRAM is corrupt?
By "clean" network, do you mean that there is no routing or physical connection at all between the clean network and the internet-only 877? If so, then no. there's no way to gain out-of-band access to the 877 without a modem. You also cannot conf...