Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all,I am planning to implement a NAC appliance server in one of our customers. The wired LAN is based on cisco catalyst switches and there is going to be a wireless LAN with one Wireless LAN controller and about 25 access points (all Cisco equipme...
Hi All,I have an IDSM-2 module and I have noticed that the analysis engine stops very frequently (I do a show version and I see the analisys engine not running). Is there a way to restart it without reseting the module?I also see the following messag...
Hi all,I am trying to manage a MSFC module with Cisco Security Manager. I am trying to find documentation in order to find out if it is possible to manage it or not.Does anybody know if it is possible?Regards
I am currently setting up an ISDM2 module using VACLs to send traffic to the module. Is there a way to configure 2 different VACLs and forward the traffic of each VACL to a different data port on the IDSM module?Regards
Does anybody Know if there is a way to manage more than 40 NAC Servers with the NAC Manager Appliance. According to the documentation the maximum number of devices that you can manage with a NAC Manager Appliance is 40. I think you need to have a clu...
Thanks Robert. In my case I am planning to deploy a central NAC appliance at the main office to control some branch offices and local wired users at the main office. The NAC appliance will operate in out-of-band mode. But for wireless users at the ma...
Thanks Jon,I was confused because in a reguar ASA you don't need to configure the acces-list from a higher to a lower security interface and in the FWSM you do need to apply an inboud access-list in the interfase no matter the security level.It look...
Thanks Chris,I will try the IOS upgrade to see if that helps me to solve the issue, by the way I am still looking for some debugs or troubleshooting commands that help me to verify that the IPS (and inspect engine) is dropping the packets. Do you kno...
