Hi,I have an  ASA 5510 working in Routed mode for a company with the following networks. everything works fine as desired.Below are the interfaces, security and  ip addresses .Ethernet0/0   DC_SERVER   security-level 100ip address 172.16.11.12 255.25...

hi,I have configure ASA 5510 in transparent mode.The management ip 172.168.22.254 .I have my computer connected to the inside port Eth0/1 of the firewall with IP address 172.168.22.2/24I have a router connected to the outside  port Eth 0/0 of the fir...

Hi,   I am configuring  2811  routers for two site  Site Aand site B. Site A router  has  two branches,  with subnet 172.168.7.1/24 and 172.168. 22.1/24  site B router has  Server network ie 172.168.11.1/24  connected to it. I have 2  lease line ie 2...

Hi,Can any one  provide me the sample configuration in CLI to set up ASA 5510 in Transparent mode.I have a 2811 router and intend to connect my servers behind the ASA 5510 firewall in transparent mode.Thanks in advance.

Hi,I am hosting Windows ADS domain controller on the inside(sec 100) of the firewallI have users conneected to outside (sec 0) of the   firewallI have turned on static NAT for the domain controller. " static (inside,outside) 172.168.1.1 192.168.1.1  ...