Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello Experts,Is IOS XR supports OSPFV3 adjacency for ipv4 similar to IOS ? IOS-XR ospfv3 <--ipv4--> IOS ospfv3 ? IOS-XR ospfv3 <--ipv4--> IOS-XR ospfv3 ? Kindly share the configuration if it is possible..
Hello Giuseppe,Thank you for the reply,My scenario is like this, ipv6 is enable already in gi0/1 interfaces, and loopback 0 advertised to ospfv3 for both AF ipv6 and ipv4IOS ospfv3<-gi0/1----gi0/1-> IOS ospfv3 > here both side ipv4 and ipv6 loopbac...
Check whether DMVPN phase 2 working, if it works then shut all the tunnels and add ip nhrp redirect and shortcut accordingly to hub and spokes then no shut all the tunnels, it works for me.
Sorry I understand this is an old discussion,May I know, if the replace card is same model, will that also cause to lose the port configuration of module 6 ?
Cisco support response,FYIIm CCIE RS, Is it possible to get new CCIE Enterprise Infrastructure certification by only doing its written exam ?Support : You do not need to get the CCIE Enterprise Infrastructure written exam anymore since you will rece...
