Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All. Thanks in advance for any assistance. I picked up a second hand AIR-AP3802I-E-K9 whos serial number appears on the list of affected AP's that were manufactured Dec 2017 and January 2018 that exhibit unable to connect to wired network, spammin...
setenv BOOT part2saveenvresetWith this it does change the primary boot partition to part #2, however it sees it as a backup or "fallback" partition and copies the files across seemingly from Partion #1 in the process.Neither the COS or boot loader ac...
Or maybe publish the serial restore process through u-boot (loadb, loadx, loady) with the OS ? Just seems rather iniquitous and disingenious to distribut a batch of AP's with firmare that blocks the primary nic interface and then have all this BS wit...
I will try this route, however, in the interim, does a recovery image exist for CISCO 3801I that I can run from u-boot rcvr command.?? or as with the u-boot documentation a state secret?
I have through use of extracted files from the LWAP tar file and combined use of u-boot command bootp, tftpboot, bootm and bootd managed to get the image loaded onto the AP, the AP has joined the controller and working. Now that I have a working acce...
I have the LWAP ap3g3-k9w8-tar.153-3.JPK1.tar file as well and the Mobility AIR-AP3800-K9-ME-8-10-151-0.zip files.The Current 8.5.111.0 version only has archive download-sw options and there is no network connectivity to use archive for the LWAP file...
