Hi.Actually, There was no command log left because it was trial and error, but it was recovered by the following method. (1) Download old Image before Update from Cisco Portal(2) Set up the TFTP server on the same NW of LoRaGW, and place the (1) Imag...

This problem has solved by myself. As with earlier indications, U-boot version and Image version were unmatched.After the old Image was downloaded again , the firmware upgrade was performed again, it succeeded!! Thanks.

Hi.After trying upgrade to the 2.0.32 , I have a similar situation.Please tell me how to repair from this situation. the following log is always appear when reset the LPWA modem.---Marvell>> resetresetting ...BootROM - 1.73Booting from SPI flash, Sec...