About TheCyberMan

TheCyberMan · 04-05-2021

I have a pair of SG350X's connected with a trunk. The trunk configuration is: 1T, 68T, 10T, 11T, 999U To each of the switches is configured a network device from Hirschmann. These devices communicate with a proprietary protocol which requires tagged ...

TheCyberMan · 06-11-2019

Good Evening, I have an ASA 5516-X running the traditional ASA image which is working fine at the moment however I would like to replace it with FTD. I've got another ASA 5516-X which is running the latest FTD image, we are managing this locally thro...

TheCyberMan · 04-10-2019

Good Afternoon All, I've got an ASA 5516 FirePower here on site running 9.10(1).The outside interface is allocated a /29 from the ISP, let's call it 1.2.3.112/29. The ASA outside (Gi1/1) address is 1.2.3.114/29 and the ISP router is 1.2.3.113/29.We'v...

TheCyberMan · 06-13-2019

Thank you for the information Mohammed, that's a shame but we will have to look at another approach to this

TheCyberMan · 04-26-2019

I looked at doing a bridge on a spare 5516-X I have running FTD but I found this configuration won't work, at least not on FTD as you cannot bind the local interface for an IPSec Site-to-Site VPN to a BVI. Not sure if this is true of the conventional...

TheCyberMan · 04-15-2019

Thanks Francesco, Looks as though any method I try and use to achieve this is going to cause service disruption.I had thought about using multiple contexts but its a lot of administration to achieve a simple task. I will probably come in out of hours...

TheCyberMan · 04-12-2019

Francesco, We want to achieve this without NAT to give a more realistic simulation of the deployment scenario for the test firewalls without having NAT-T and double-NAT considerations in our tests which won't be there when the units are deployed out ...

Member Since	‎04-10-2019 07:12 AM
Date Last Visited	‎04-07-2021 12:03 AM
Posts	7

User Statistics

User Activity

SG350X Ethernet II frames with SNAP-LLC not forwarding

ASA Firepower FTD - Advanced Multiple IPSec Tunnel Config Question

Cisco ASA FirePower WAN to DMZ IP Passthrough (No NAT)

Re: ASA Firepower FTD - Advanced Multiple IPSec Tunnel Config Question

Re: Cisco ASA FirePower WAN to DMZ IP Passthrough (No NAT)

Re: Cisco ASA FirePower WAN to DMZ IP Passthrough (No NAT)

Re: Cisco ASA FirePower WAN to DMZ IP Passthrough (No NAT)