Good Night Paul, Thanks for your reply. I also thought why it isn't defined on the Main Router, but the topology or the network was not designed by me nor my co-workers. By some security policies I can't send you the whole configuration but I can send how the port is configured. By the way I'm sorry I confused something. The WRP 400 is connected to a Switch Huawei and then that switch is connected to a Switch Core where the pool was made. #Switch Huawei - Port Configuration - Where the WRP is connected to. interface GigabitEthernet1/0/12 description WRP204 voice-vlan 90 enable port hybrid pvid vlan 204 port hybrid tagged vlan 90 port hybrid untagged vlan 204 stp edged-port enable #Cisco Switch Core C3560 (v12.2) - DHCP Configuration ip dhcp excluded-address 10.10.24.1 10.10.24.10 ! ip dhcp pool P2-APT4 network 10.10.24.0 255.255.255.0 default-router 10.10.24.1 dns-server 4.2.2.2 8.8.8.8 8.8.4.4 ! interface Vlan204 description P2-APT4 ip address 10.10.24.1 255.255.255.0 ! There is a Voice pool but is correctly defined on the main router. I don't know if you need something else. Best regards, Luis Solera.
... View more
Good Night,
My case is the following. I have a WRP400 that connects to a Cisco Switch, and DHCP is defined in that switch, so I disable the DHCP that is in the WRP.
However when I deactivate the DHCP in the WRP and try to connect a device to the ports of the WRP, the PC does not grab DHCP from the Cisco switch where the pool is defined.
What configuration do I apply for the WRP so then I can get DHCP from the pool of the Switch?
I remain attentive and thank you very much. Best regards, Luis Solera Alfaro.
... View more
.jpg "VIP Advisor"){kind=icon}
