Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I want to transfer data from data logging (192.168.2.12) and connecting to R1 (192.168.2.5) from the outsidethis is my asa configuration.please advise. ASA Version 9.12(2)!hostname Firewall-ASAno mac-address autoip local pool L2TP-Pool 192.168.12.1-1...
one more question sir. how do I wrote a configuration file: connect from area A, B, C to 192.168.2.5 eq ssh192.168.2.5 eq isakmp192.168.2.5 eq 4500esp -> 192.168.2.5ah -> 192.168.2.5 best regards,Lucifur
C:\Users\engineer>telnet 10.10.10.254 8888Connecting To 10.10.10.254...Could not open connection to the host, on port 8888: Connect failed ++++++++++++++++Auto NAT Policies (Section 2)1 (inside) to (outside) source static CEMs-DATA interface service ...
I tried to reconfig again but no luck configuration: !ASA Version 9.1(2)!hostname ASA5512Xnamesip local pool L2TP-Pool 192.168.12.1-192.168.12.10!interface GigabitEthernet0/0nameif outsidesecurity-level 0ip address 10.10.10.254 255.255.255.252!interf...
