Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,
I tried to go through the Cisco document but I got confused whether ASR 1002 will support ISSU or not. Please provide exact steps to upgrade with current IOS XE on ASR 1002 if someone have.
Please help someone, I have executed the below command on ASR 1000 router and there are 2 things happened. 1.This command removed all the BGP configuration associated to that peer IP on a router, 2. Same command we have executed another ASR 1000 rout...
Thansk Martin,When we give extra keyword it should give error but in this case we did not get error and it removed whole config, is it depends on IOS? Same command when we give on regular IOS it is not removing any config associated with BGP
Hi Noob,We can use networks like below,192.168.1.236/30192.168.1.240/280r192.168.1.236/30192.168.1.240/29192.168.1.248/29We can group remaining networks but the number of ip's should be 2 to the power of something like above.
I hope you wanted to understand how line vty is working.If yes, then login switch2 via console and telnet switch1 using ip which is configured for Vlan1 in the switch1.
Hi, You can check using below steps,1. Connect two switches2. Configure IP address in Vlan 1 interface on any one switch3. Configure enable password4. Configure line vty on same switchThen telnet configured ip from another switch.Example,Step 2:Switc...
You can check using below steps,1. Connect two switches2. Configure IP address in Vlan 1 interface on any one switch3. Configure enable password4. Configure line vty on same switchThen telnet configured ip from another switch.Example,Step 2:Switch1(c...
