Hello everyone, I would like to introduce a new set of sample applications which configures static routing for XR data model using the CRUD service and the gNMI provider. This set of sample applications include the following four boilerplate applications and ten custom applications: gn-create-xr-ip-static-cfg-10-ydk.py - create boilerplate gn-create-xr-ip-static-cfg-20-ydk.py - IPv4 route to next-hop address gn-create-xr-ip-static-cfg-21-ydk.py - IPv6 route to next-hop address gn-create-xr-ip-static-cfg-22-ydk.py - IPv4 route to Null0 gn-create-xr-ip-static-cfg-23-ydk.py - IPv6 route to Null0 gn-create-xr-ip-static-cfg-24-ydk.py - IPv4 route with attributes gn-create-xr-ip-static-cfg-25-ydk.py - IPv6 route with attributes gn-delete-xr-ip-static-cfg-10-ydk.py - delete boilerplate gn-delete-xr-ip-static-cfg-20-ydk.py - delete all static routes gn-delete-xr-ip-static-cfg-30-ydk.py - delete all IPv4 static routes gn-delete-xr-ip-static-cfg-31-ydk.py - delete all IPv6 routes gn-delete-xr-ip-static-cfg-40-ydk.py - delete IPv4 route gn-read-xr-ip-static-cfg-10-ydk.py - read boilerplate gn-update-xr-ip-static-cfg-10-ydk.py - update boilerplate If you want to access to the python files, the JSON files, and the CLI config files, please check them out in the following Github directory: https://github.com/CiscoDevNet/ydk-py-samples/tree/master/samples/basic/crud/gnmi/models/cisco-ios-xr/Cisco-IOS-XR-ip-static-cfg   Enjoy! ... View more

Hi there, I have added new sample applications which configure access lists for XR data model using the CRUD service and the gNMI provider. These sample applications consist of four boilerplate applications and ten custom applications as follows: gn-create-xr-ipv4-acl-cfg-10-ydk.py - Create boilerplate gn-create-xr-ipv4-acl-cfg-20-ydk.py - Set log-update rate gn-create-xr-ipv4-acl-cfg-22-ydk.py - Set log-update rate & threshold gn-create-xr-ipv4-acl-cfg-30-ydk.py - Allow one host gn-create-xr-ipv4-acl-cfg-32-ydk.py - Allow multiple hosts gn-create-xr-ipv4-acl-cfg-34-ydk.py - Log access attempts gn-create-xr-ipv4-acl-cfg-80-ydk.py - Allow single prefix gn-create-xr-ipv4-acl-cfg-82-ydk.py - Allow multiple prefixes gn-create-xr-ipv4-acl-cfg-84-ydk.py - Block a prefix gn-create-xr-ipv4-acl-cfg-86-ydk.py - Allow prefix ranges gn-delete-xr-ipv4-acl-cfg-10-ydk.py - Delete boilerplate gn-delete-xr-ipv4-acl-cfg-20-ydk.py - Delete all access list entries gn-read-xr-ipv4-acl-cfg-10-ydk.py - Read boilerplate gn-update-xr-ipv4-acl-cfg-10-ydk.py - Update boilerplate   You can find the python files, the JSON files, and the CLI config files for this set of applications in the following CiscoDevNet Github repository: https://github.com/CiscoDevNet/ydk-py-samples/tree/master/samples/basic/crud/gnmi/models/cisco-ios-xr/Cisco-IOS-XR-ipv4-acl-cfg   Give it a try! ... View more

Hi YDK Community, Here is another new set of sample applications which configures the address resolution protocol for XR data model using the CRUD service and the gNMI provider. This set consists of twelve boilerplate applications and seven custom applications as follows:   gn-create-xr-ipv4-arp-cfg-10-ydk.py - Create boilerplate gn-create-xr-ipv4-arp-cfg-11-ydk.py - Create boilerplate gn-create-xr-ipv4-arp-cfg-12-ydk.py - Create boilerplate gn-create-xr-ipv4-arp-cfg-20-ydk.py - Global with cos gn-create-xr-ipv4-arp-cfg-22-ydk.py - Global with cos and max entries gn-create-xr-ipv4-arp-cfg-30-ydk.py - Single static arp entry gn-create-xr-ipv4-arp-cfg-32-ydk.py - Multiple static arp entries gn-create-xr-ipv4-arp-cfg-34-ydk.py - Multiple static arp entries w/vrf gn-delete-xr-ipv4-arp-cfg-10-ydk.py - Delete boilerplate gn-delete-xr-ipv4-arp-cfg-11-ydk.py - Delete boilerplate gn-delete-xr-ipv4-arp-cfg-12-ydk.py - Delete boilerplate gn-delete-xr-ipv4-arp-cfg-20-ydk.py - Delete all global config gn-delete-xr-ipv4-arp-cfg-30-ydk.py - Delete all arp entries gn-read-xr-ipv4-arp-cfg-10-ydk.py - Read boilerplate gn-read-xr-ipv4-arp-cfg-11-ydk.py - Read boilerplate gn-read-xr-ipv4-arp-cfg-12-ydk.py - Read boilerplate gn-update-xr-ipv4-arp-cfg-10-ydk.py - Update boilerplate gn-update-xr-ipv4-arp-cfg-11-ydk.py - Update boilerplate gn-update-xr-ipv4-arp-cfg-12-ydk.py - Update boilerplate Please visit the link below to find python files, JSON files, and CLI config files for this XR ARP: https://github.com/CiscoDevNet/ydk-py-samples/tree/master/samples/basic/crud/gnmi/models/cisco-ios-xr/Cisco-IOS-XR-ipv4-arp-cfg   Have fun!      ... View more

Hello Community, Here is another new set of sample applications  which configures the device's  BGP  for  XR  data model  using t he  CRUD service and  the  gNMI provider . This set consists of four boilerplate applications and seven custom applications as follows: gn-create-xr-ipv4-bgp-cfg-10-ydk.py - create boilerplate gn-create-xr-ipv4-bgp-cfg-40-ydk.py - iBGP IPv4 neighbor grp w/o policy gn-create-xr-ipv4-bgp-cfg-41-ydk.py - iBGP IPv6 neighbor grp w/o policy gn-create-xr-ipv4-bgp-cfg-42-ydk.py - iBGP IPv4 neighbor grp w/ policy gn-create-xr-ipv4-bgp-cfg-43-ydk.py - iBGP IPv6 neighbor group w/ policy gn-create-xr-ipv4-bgp-cfg-44-ydk.py - eBGP IPv4 neighbor grp w/ policy gn-create-xr-ipv4-bgp-cfg-45-ydk.py - eBGP IPv6 neighbor grp w/ policy gn-delete-xr-ipv4-bgp-cfg-10-ydk.py - delete boilerplate gn-delete-xr-ipv4-bgp-cfg-20-ydk.py - delete all BGP configuration gn-read-xr-ipv4-bgp-cfg-10-ydk.py - read boilerplate gn-update-xr-ipv4-bgp-cfg-10-ydk.py - update boilerplate Please visit the link below to find python files, JSON files, and CLI config files for this XR BGP: https://github.com/CiscoDevNet/ydk-py-samples/tree/master/samples/basic/crud/gnmi/models/cisco-ios-xr/Cisco-IOS-XR-ipv4-bgp-cfg   Have fun!  ... View more

Hello again, I have added new sample applications to configure keychain for XR data model using  the  CRUD service and  the  gNMI provider . These sample applications include four boilerplate applications and three custom applications as follows: gn-create-xr-lib-keychain-cfg-10-ydk.py - create boilerplate gn-create-xr-lib-keychain-cfg-20-ydk.py - one AES-128-GCM key gn-create-xr-lib-keychain-cfg-22-ydk.py - one AES-128-GCM key gn-create-xr-lib-keychain-cfg-24-ydk.py - two rolling keys gn-delete-xr-lib-keychain-cfg-10-ydk.py - delete boilerplate gn-read-xr-lib-keychain-cfg-10-ydk.py - read boilerplate gn-update-xr-lib-keychain-cfg-10-ydk.py - update boilerplate  Please visit the following link to get a full shot of all the python files, CLI files, and JSON files:  https://github.com/deom119/ydk-py-samples/tree/master/samples/basic/crud/gnmi/models/cisco-ios-xr/Cisco-IOS-XR-lib-keychain-cfg   Best! ... View more

Hi YDK Community, I am introducing a new set of sample applications which configures gRPC server for XR data model  using  the  gNMI provider  and the  CRUD service . This set of sample applications contains four boilerplate applications and seven custom applications as follows: gn-create-xr-man-ems-cfg-10-ydk.py - create boilerplate gn-create-xr-man-ems-cfg-20-ydk.py - Basic gRPC (IPv4) gn-create-xr-man-ems-cfg-21-ydk.py - Basic gRPC (IPv6) gn-create-xr-man-ems-cfg-22-ydk.py - gRPC with TLS (IPv4) gn-create-xr-man-ems-cfg-23-ydk.py - gRPC with TLS (IPv6) gn-create-xr-man-ems-cfg-24-ydk.py - gRPC with TLS and max req (IPv4) gn-create-xr-man-ems-cfg-25-ydk.py - gRPC with TLS and max req (IPv6) gn-delete-xr-man-ems-cfg-10-ydk.py - delete boilerplate gn-delete-xr-man-ems-cfg-20-ydk.py - delete all gRPC configuration gn-read-xr-man-ems-cfg-10-ydk.py - read boilerplate gn-update-xr-man-ems-cfg-10-ydk.py - update boilerplate  In the following Github directory, you can find the python files, JSON files, and CLI files:  https://github.com/deom119/ydk-py-samples/tree/master/samples/basic/crud/gnmi/models/cisco-ios-xr/Cisco-IOS-XR-man-ems-cfg   Try it out! ... View more

Hello Friends, I have added sample applications to configure global MPLS attributes (MPLS LSD) for  XR  data model  using  the  CRUD service and  the  gNMI provider . This set includes four boilerplate applications and two custom applications as follows: gn-create-xr-mpls-lsd-cfg-10-ydk.py - create boilerplate gn-create-xr-mpls-lsd-cfg-20-ydk.py - disable for all packets gn-delete-xr-mpls-lsd-cfg-10-ydk.py - delete boilerplate gn-delete-xr-mpls-lsd-cfg-20-ydk.py - delete all MPLS LDP config gn-read-xr-mpls-lsd-cfg-10-ydk.py - read boilerplate gn-update-xr-mpls-lsd-cfg-10-ydk.py - update boilerplate You can find the python files, CLI configuration files, and the JSON files in the following link: https://github.com/CiscoDevNet/ydk-py-samples/tree/master/samples/basic/crud/gnmi/models/cisco-ios-xr/Cisco-IOS-XR-mpls-lsd-cfg   Enjoy :D ... View more

Hi YDK Community, I have brought very simple sample applications, which show the ISIS operational state  for  XR  data model  using  the  gNMI provider  and the  CRUD service . The following set of sample applications includes one boilerplate app and two custom apps to read and format ISIS operational state: gn-read-xr-clns-isis-oper-10-ydk.py - boilerplate gn-read-xr-clns-isis-oper-20-ydk.py - show isis neighbors gn-read-xr-clns-isis-oper-22-ydk.py - show isis adjacency  The parent directory of the provided files is as follows:  https://github.com/deom119/ydk-py-samples/tree/master/samples/basic/crud/gnmi/models/cisco-ios-xr/Cisco-IOS-XR-clns-isis-oper   This set has only three applications!  Give it a try~  ... View more

Hello Community,   I have added a new set of sample applications which configure segment routing SID mappings (IPv4 and IPv6) for XR data model  using  the  gNMI provider  and the  CRUD service. This set of sample applications includes the following four boilerplate apps and five custom apps:  gn-create-xr-segment-routing-ms-cfg-10-ydk.py - create boilerplate gn-create-xr-segment-routing-ms-cfg-20-ydk.py - IPv4 single mapping gn-create-xr-segment-routing-ms-cfg-21-ydk.py - IPv6 single mapping gn-create-xr-segment-routing-ms-cfg-22-ydk.py - IPv4 multiple mappings gn-create-xr-segment-routing-ms-cfg-23-ydk.py - IPv6 multiple mappings gn-delete-xr-segment-routing-ms-cfg-10-ydk.py - delete boilerplate gn-delete-xr-segment-routing-ms-cfg-20-ydk.py - delete all mapping cfg gn-read-xr-segment-routing-ms-cfg-10-ydk.py - read boilerplate gn-update-xr-segment-routing-ms-cfg-10-ydk.py - update boilerplate  These python files, JSON files, and CLI config files are all located in the following directory:  https://github.com/CiscoDevNet/ydk-py-samples/tree/master/samples/basic/crud/gnmi/models/cisco-ios-xr/Cisco-IOS-XR-segment-routing-ms-cfg   Start your day with YDK-py sample apps! Best, ... View more

Hello Community, I am proud to announce that we have over 300 gNMI sample applications for OpenConfig and XR data models in our YDK-Py Github repository! Yay!   Now is the best time for you to check out our CRUD/gNMI sample applications.   Follow the next link to see all the models we have covered with CRUD/gNMI! https://github.com/CiscoDevNet/ydk-py-samples/tree/master/samples/basic/crud/gnmi/models   Happy gNMI day!   ... View more

Hello YDK lovers, I have added a new set of sample applications which configures the device's host name for XR data model  using  the  gNMI provider  and the  CRUD service .   This set includes four boilerplate apps and four custom apps for XR Shellutil configuration: gn-create-xr-shellutil-cfg-10-ydk.py - create boilerplate gn-create-xr-shellutil-cfg-20-ydk.py - set hostname gn-delete-xr-shellutil-cfg-10-ydk.py - delete boilerplate gn-delete-xr-shellutil-cfg-20-ydk.py - delete hostname (set default) gn-read-xr-shellutil-cfg-10-ydk.py - read boilerplate gn-read-xr-shellutil-cfg-20-ydk.py - read/print hostname gn-update-xr-shellutil-cfg-10-ydk.py - update boilerplate gn-update-xr-shellutil-cfg-20-ydk.py - update hostname All the python apps, JSON files, CLI config files are available at the following link: https://github.com/CiscoDevNet/ydk-py-samples/tree/master/samples/basic/crud/gnmi/models/cisco-ios-xr/Cisco-IOS-XR-shellutil-cfg   Now you can simply change the device's host name with this python app! Give it a try to change your device's host name to something cool :D ... View more

Hello Community, I am glad to inform you that we have added sample applications to configure Telemetry configuration for XR data model  using  the  gNMI provider  and the  CRUD service on the first day of August!   This set of sample applications includes 4 boilerplate apps and 9 custom apps as follows. gn-create-xr-telemetry-10-ydk.py - create boilerplate gn-create-xr-telemetry-20-ydk.py – tcp dialout single sensor-group/subscription gn-create-xr-telemetry-22-ydk.py – grpc dialout multiple sensor-paths gn-create-xr-telemetry-24-ydk.py – grpc dialout multiple sensor-groups gn-create-xr-telemetry-26-ydk.py – grpc dialout multiple destinations gn-create-xr-telemetry-28-ydk.py – grpc-tls dialout with multiple destination-groups gn-create-xr-telemetry-30-ydk.py - dialin single sensor-group/subscription gn-create-xr-telemetry-32-ydk.py - dialin multiple sensor-paths gn-create-xr-telemetry-34-ydk.py - dialin multiple sensor-groups gn-delete-xr-telemetry-10-ydk.py - delete boilerplate gn-delete-xr-telemetry-20-ydk.py - delete all telemetry config gn-read-xr-telemetry-10-ydk.py - read boilerplate gn-update-xr-telemetry-10-ydk.py - update boilerplate You can find all the python app files, JSON files, and CLI files in the following link:  https://github.com/CiscoDevNet/ydk-py-samples/tree/master/samples/basic/crud/gnmi/models/cisco-ios-xr/Cisco-IOS-XR-telemetry-model-driven-cfg   Check it out!  ... View more

Hello again, I am happy to announce that we have uploaded new sample applications for OpenConfig routing policy configuration using  the  gNMI provider  and the  CRUD service .   The OC routing policy sample applications include four boilerplate apps and five custom apps as follows: gn-create-oc-routing-policy-10-ydk.py - create boilerplate gn-create-oc-routing-policy-22-ydk.py - accept all prefixes gn-create-oc-routing-policy-24-ydk.py - match path/comm, set comm/lpref gn-create-oc-routing-policy-26-ydk.py - match prefix, set comm/lpref gn-create-oc-routing-policy-28-ydk.py - set next hop self gn-delete-oc-routing-policy-10-ydk.py - delete boilerplate gn-delete-oc-routing-policy-20-ydk.py - delete all policy configuration gn-read-oc-routing-policy-10-ydk.py - read boilerplate gn-update-oc-routing-policy-10-ydk.py - update boilerplate As always, you can find the python apps, JSON files, and CLI configuration files in the following link:  https://github.com/CiscoDevNet/ydk-py-samples/tree/master/samples/basic/crud/gnmi/models/openconfig/openconfig-routing-policy   Happy OpenConfig day :D!!  ... View more

Hi Community, In the last post, I brought out CRUD/gNMI sample applications configuring time zone. This time, I would like to introduce sample applications which configure locale and language for XR data model  using the gNMI provider and the CRUD service. These sample applications includes four boilerplate apps and seven custom apps: gn-create-xr-infra-infra-locale-cfg-10-ydk.py - create boilerplate gn-create-xr-infra-infra-locale-cfg-20-ydk.py - en_US gn-create-xr-infra-infra-locale-cfg-22-ydk.py - zh_CN gn-create-xr-infra-infra-locale-cfg-24-ydk.py - de_DE gn-create-xr-infra-infra-locale-cfg-26-ydk.py - pt_BR gn-create-xr-infra-infra-locale-cfg-28-ydk.py - en_NG gn-delete-xr-infra-infra-locale-cfg-10-ydk.py - delete boilerplate gn-delete-xr-infra-infra-locale-cfg-20-ydk.py - delete all locale config gn-read-xr-infra-infra-locale-cfg-10-ydk.py - read boilerplate gn-read-xr-infra-infra-locale-cfg-20-ydk.py - read/format/print locale gn-update-xr-infra-infra-locale-cfg-10-ydk.py - update boilerplate  If you want to see the configuration in JSON format or in CLI, please find them in the following directory in the YDK-py samples Github repository: https://github.com/CiscoDevNet/ydk-py-samples/tree/master/samples/basic/crud/gnmi/models/cisco-ios-xr/Cisco-IOS-XR-infra-infra-locale-cfg    Please give it a try! ... View more

Hello YDK Community, I would like to introduce a new set of sample applications for XR Infra Infra Clock Linux . This set includes four boilerplate apps and six custom apps to configure device time zone using the gNMI provider and the CRUD service. gn-create-xr-infra-infra-clock-linux-cfg-10-ydk.py - create boilerplate gn-create-xr-infra-infra-clock-linux-cfg-20-ydk.py - PST PST8PDT gn-create-xr-infra-infra-clock-linux-cfg-22-ydk.py - CST PRC gn-create-xr-infra-infra-clock-linux-cfg-24-ydk.py - CET CET gn-create-xr-infra-infra-clock-linux-cfg-26-ydk.py - BRT Brazil/East gn-create-xr-infra-infra-clock-linux-cfg-28-ydk.py - WAT Africa/Douala gn-delete-xr-infra-infra-clock-linux-cfg-10-ydk.py - delete boilerplate gn-delete-xr-infra-infra-clock-linux-cfg-20-ydk.py - delete all tz cfg gn-read-xr-infra-infra-clock-linux-cfg-10-ydk.py - read boilerplate gn-update-xr-infra-infra-clock-linux-cfg-10-ydk.py - update boilerplate The following link will connect you to the parent directory of the python apps, JSON data, and CLI data:  https://github.com/CiscoDevNet/ydk-py-samples/tree/master/samples/basic/crud/gnmi/models/cisco-ios-xr/Cisco-IOS-XR-infra-infra-clock-linux-cfg    Enjoy!!  ... View more