Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Guys,Today i have a topology where i have a nexus 7K, where there are multiple VRFs that terminate on 4140 Cluster.One or more VRF is part of a zone on the Firepower. the Firepower doesnt have any VRF. Policies are used to control access to the d...
Hi guysI have a requirement to separate 5 VRFs into nexus VDCs.While each VDC will host the relevant VRF and terminated on the Firepower FTD.In regards to the Cluster Control Link, Since the firepower will have specific interfaces into different zone...
What is the best practice of having VRF configured on nexus 7k, with several subnets(VLAN interfaces) but termination on the firewall? At least how to have those configured from the firewall perspective?I have different security zones to be configure...
Hellothanks for the reply, that was not my question. I know how to create it on FXOS.My question was how match what I have currently in the zones to the new Instances.Today the zones talk to each other, on a the firepower itself. For example, traffic...
Its a bit different setup. Currently the infrastructure is segregated using VRF that terminates on the firewall, in their respective zone.There are many zones, like MGMT zone, internal zone, external zone etc....Each of them have a bunch of subnets u...
more question, if you are using different VDCs to connect to the firepower that servers different purposes, would you have a control link that connect to the firepower from those VDCs?I think its possible to have multiple links under the cluster co...
Hello MarvinI have those three vlans under a VRF:200,210,300as per your recommendations, I should have vlan 555 for example as a transit vlan which is a subnet shared between the nexus interface and the firewall. So on the firewall there would a sub-...
