Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,I'm trying to setup a 5508 to work with dynamic vlan assignement using the same SSID.I've followed everyting in this document http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008076317c.shtmlbut it doesn't wor...
I found the problem after all: H-REAP !Dynamic VLAN assignement doesn't work with H-REAP, it's written in the H-REAP documentation and somehow I missed it!
So I tried to use NAP and send to the WLC the VLAN id as a number and here is what I get:Tunnel-Type 16777229 should be 13Also tried to only send the interface name and again doesn't work.So now I've really hit a brick wall. TAC is probably the only ...
Sorry, I didn't phrase it properly, ignoring one way of VLAN assignement is undestandable, I was only referring on how it understands the VLAN id value.NAP can be a solution which I didn't think, will certainly try it and report the results.Thanks
That might be the reason but as I wrote previously this setup also serves many switches thus I can't change the configuration without affecting the switches.Also setting up another ACS just because the WLC doesn't understand some values is an overkil...
A bit more debugging gave me this:*Oct 15 09:31:28.491: xx:xx:xx:xx:xx:xx Received Tunnel-Group-ID Attribute -- ignoring AES Interface-Name '200' for STA xx:xx:xx:xx:xx:xx.*Oct 15 09:31:28.491: xx:xx:xx:xx:xx:xx Tunnel-Type 16777229 should be 13 for ...
